Models - SPR48 Load Chart

SPR48 Workrane Load Capabilities

(FT)

Lower boom mount

over end on rail

or 3

60^o on outriggers

Upper boom mount

over end on rail

360^o on outriggers

Either boom

mount over

side on rail

40,000

35,600

25,200

18,000

12,900

40,000

36,800

28,500

20,000

14,500

9,600

30,,200

23,700

17,800

12,500

9,500

7,600

40,000

34,900

25,200

19,200

14,700

10,500

36,000

28,100

20,200

15,200

11,500

7,800

23,600

17,700

12,400

9,400

7,500

6,100

34,100

24,700

19,200

15,200

12,100

8,900

27,500

20,000

15,300

12,000

9,300

6,500

17,700

12,300

9,300

7,400

6,000

5,000

33,100

24,200

18,900

15,400

12,500

10,100

7,500

27,000

19,600

15,300

12,200

9,800

7,700

5,400

17,600

12,200

9,200

7,300

5,900

5,000

4,200

32,300

23,600

18,600

15,200

12,600

10,400

8,400

6,400

26,400

19,300

15,100

12,100

9,600

8,100

6,400

4,500

17,500

12,100

9,100

7,200

5,800

4,800

4,100

3,500

23,200

18,200

14,900

12,400

10,500

8,900

7,200

5,500

18,900

14,800

12,000

9,800

8,200

6,800

5,300

3,800

12,000

9,000

7,100

5,700

4,700

4,000

3,400

2,900

1.	All operators and support personnel shall read and fully understand manufacturer's furnished operator's manual, the latest applicable American National Standards Institute (ANSI) Safety Standards for Cranes and any applicable federal, state and local safety regulations before operating machine. Crane and load rating comply with ANSI and Power Crane & Shovel Association (PCSA) standards.
2.	All "On OUTRIGGER" lifts sall be made with outrigger beams fully extended and jacks extended to fully support and level machine.
3.	Underlined ratings are based on machine's strucural strength. All other ratings do not exceed 85% of tipping load on rail and 80% of tippiing on outriggers with machine stable on firm ground.
4.	DO NOT EXCEED crane loading ratings. When load radius or boom angle is between listed values, use the smaller load rating. DO NOT ATTEMPT TO TIP MACHINE TO DETERMINE ALLOWABLE LOADS.
5.	Weight of hook blocks, buckets, and all other load handling devices are not accounted for in the load chart. Load handling devices are part of a load.
6.	Reduce ratings appropriately for wind conditions, speed of operation, soft or uneven supporting surface, etc.
7.	Load ratings apply to this machine ONLY as originally manufactured and equipped. Unauthorized modifications or optional equipment may reduce load capacity. Please consult *LITTLE GIANT* before modifications or or use of optional equipment not covered on this chart.
8.	These load ratings are for lift service only. Consult and adhere to appropriate load ratings charts for other applications (clamshell, dragline, magnet, etc.)

Back

Due to continuing efforts to improve our products, literature is subject to change without notice. Check back for frequent updates!